G1+ Gauge
152,00€ w/o VAT per box 10 unitsFor inside and outside : weather-resistant. Resolution: 0,05mm. With easy direct readout.
G1 Gauge
127,10€ w/o VAT per box 10 unitsFor inside and outside : weather-resistant. Resolution: 0,1 mm.
E1 gauge – Digital crackmeter
304,50€ w/o VAT with 5 pairs of P1E1 plates (for 5 cracks)Removable digital crackmeter. 1-axis or 2-axis tracking. Resolution: 0.01 mm.
R1 gauge – Remote crackmeter
392,00€ w/o VAT with 1-year subscription includedStand-alone wireless crackmeter for remote crack monitoring. Resolution: 0.01 mm / 0.1°C / 1% RH.
R2 Gauge – Large-range connected crack monitor
539,00€ w/o VATLarge-range connected crack monitor (up to 100 mm). Resolution: 0.01 mm / 0.1°C / 1% RH.
R5 Gauge – Wireless Inclinometer (Tiltmeter)
469,00€ w/o VATWireless 2-axis inclinometer (tiltmeter) for remote tilt monitoring. Resolution: 0.005° / 0.1°C / 1% RH.
Enhanced Crack Ruler
28,70€ w/o VATMeasure the width of a crack visually or in augmented reality
G1.1 Gauge
82,00€ w/o VAT per box 10 unitsFor interior use only, particularly in dry rooms. Resolution: 0,1mm.
G1.2 Gauge
92,00€ w/o VAT per box 5 unitsTransparent for interior and exterior quality structures. Resolution: 0,1mm.
G1.3 Gauge
197,00€ w/o VAT per box 5 unitsFor cracks between 2 and 20 cm wide (maximum mounting spacing: 25 cm). Resolution: 0.1 mm.
G1.5 Gauge
128,50€ w/o VATStainless carbon. Reusable. Resolution: 0.02 mm.
G6 Gauge
141,20€ w/o VAT per box 5 unitsMonitors changes in opening and shear displacement of a crack within a single plane. Resolution: 0.1 mm.
G3 Gauge
88,90€ w/o VATMeasures the evolution of horizontal or vertical misalignment/offset between 2 structures. Resolution: 0.1 mm (i.e. 0.2 mm of movement).
R2.P Gauge – Settlement monitoring of bridges and engineering structures
784,00€ w/o VATSettlement monitoring of bridges and engineering structures. Resolution: 0.01 mm / 0.1°C / 1% RH
G5 gauge – Inclinometer
357,00€ w/o VATMeasures changes in inclination or tilt. Resolution: 0.1 mm i.e. 0.03 degrees.
3Dim Gauge
2.390,00€ w/o VATFor measuring millimetre variations in structures, whether of metal, stonework or in concrete, or in natural phenomena (cliffs, rocks etc.) over time and in the 3 dimensions. Accurate to 1/10th of a mm.
G20 gauge – Extensometer
840,00€ w/o VATMonitors the evolution of the separation between 2 points several metres apart with a resolution of 0.1 mm
G130 Gauge
Measures the change in sag, the lean of a wall or the distortion of a structure. Accurate to 1/10th of a mm.
Read more
R20 gauge – Wireless extensometer
993,00€ w/o VATRemote monitoring of the change in distance between 2 points several metres apart
G2 Gauge
188,50€ w/o VAT per unit with protective casingRecord the maximum/minimum variation on graduated scale. Resolution: 0,1 mm.
R10 Gauge – Connected hygrometer and thermometer
369,00€ w/o VATConnected hygrometer and thermometer. Resolution: 0.1°C / 1% RH
Triangular gauge
36,00€ w/o VATMeasures the space between two elements
Vitrometer
39,50€ w/o VATMeasures the space between two panes
Expert’s set
92,00€ w/o VATExpert’s set including : 1 enhanced crack ruler, 3 G1 crack monitors, installation instructions, a marking pen.
Expert’s set Plus
99,50€ w/o VATExpert’s set Plus including : 1 enhanced crack ruler, 3 G1+ crackmonitors (with “digital” reading), installation instructions, a marking pen.
P1E1 plates – 1 axis tracking
50,00€ w/o VAT per box of 5 pairsBox of 5 pairs of 2 P1E1 plates for tracking on 1 axis. Accessories for E1 gauge.
P2E1 plates – 2 axis tracking
75,00€ w/o VAT per box of 5 tripletsBox of 5 triplets of 3 P2E1 plates for 2-axis tracking. Accessories for E1 gauge.
G1 protection anti-UV
8,60€ w/o VATProtection with anti-UV for G1 gauges fixed outside (delivered with impact anchors)
Glue
9,50€ w/o VATFast-curing epoxy adhesive in a twin-syringe for reinforced bonding in cases of significant surface roughness or high moisture
Mechanical Mounting Kit
27,30€ w/o VATMechanical fixing kit for surfaces unsuitable for self-adhesive installation (includes 1 drill bit + 1 PZ1/PZ2 screwdriver + 40 wall plugs and screws)
R1 Shear kit
29,70€ w/o VATShear monitoring kit for R1 gauge
E1 Misalignment Kit
24,50€ w/o VATMisalignment monitoring kit for the E1 gauge
R1 Misalignment kit
24,50€ w/o VAT without R1 crack gauge, sold separatelyMisalignment kit for R1 gauge
R1 fixing hardware Kit for bonded mounting
19,80€ w/o VATFixing hardware kit for bonded mounting of the R1 gauge (adhesive sold separately).
R1 Extension kit
44,25€ w/o VATR1 gauge extension kit
2-axis remote crack monitoring kit
813,70€ w/o VAT2-axis remote crack monitoring kit (2 R1 gauges + shear kit)
3-axis remote crack monitoring kit
1.230,20€ w/o VAT3-axis remote crack monitoring kit (3 R1 gauges + shear kit + misalignment kit)
SDS+ drill Ø13mm
12,00€ w/o VATØ13 mm SDS+ drill bit for EPDM anchors of Rx gauges.
Screw and wall plug kit for R1 gauge
6,85€ w/o VATWall plug and screw kit for reuse of the R1 gauge
Rx Battery 3.6V – 13Ah
25,00€ w/o VATSAFT battery with connector for Rx gauge
Mechanical Fastening Pack
15,00€ w/o VAT per pack of 50 unitsBag of 50 anchors and screws for mechanical fixing on surfaces unsuitable for self-adhesive mounting
Aluminium angle bar
9,90€ w/o VATFor measuring the variation in a crack in a vertical or horizontal internal angle (with self-adhesive tabs and 1 impact anchor).
G3 intermediate plate
9,40€ w/o VATTo install the G3 gauge if surface is irregular, damaged, damp or of poor quality. Delivered with impact anchors.
G3 high protection
122,30€ w/o VATG3 Protective cover in IP65 aluminium. Fourni avec visserie. Delivered with impact anchors.
G3 protection
48,50€ w/o VATG3 Protective cover in thermoformed plastic. Fourni avec visserie. Delivered with impact anchors.
G3 recording kit
79,70€ w/o VAT per kit (with G3 gauge G3 sold separately)For graphic recording of structural yielding. To be mounted on the G3 Gauge. This new device records the maximum and minimum distortion on the graph.
Stainless Steel G5 Mounting Bracket
48,40€ w/o VAT la paireFor perpendicular installation of the G5 inclinometer or G5mini inclinometer
G5 high protection
224,50€ w/o VATG5 Protective cover in IP65 aluminium. Delivered with impact anchors.
R1 Protective Cover
41,30€ w/o VATProtective cover for the R1 connected crack monitor
R5 Protective Cover
39,20€ w/o VATProtective cover for R5 gauge
G6 high protection anti-UV
9,50€ w/o VATProtection with anti-UV for G6 gauges fixed outside. Delivered with impact anchors.
Magnetic baseplates
138,40€ w/o VAT per box 2 unitsPack of a set of 2 baseplates for fixing the 3Dim. gauge.
Aluminium extension
106,60€ w/o VATAdditional extensions in treated aluminium, 0.50 m long, which are screwed into position between 2 graduated rods.
